Obtain Through bolts, bushings & nuts, Combo Spindles, Shim/bushing Kit, HD Link Pins, & Trailing Arms

Insert bushings into spindles hole to the inside

Install through bolts bushings and trailing arms

Level trailing arms and measure vertical offset (ours was 5.5mm)

Shim pins according to offset chart see HERE

Insert pins and shims

Make sure spindles have same link pin angles... YES there is a backwards way to do it and the bolts wont line up straight-rotate 180 degrees, re-insert

assemble:  Pin head-shims-spindle-shims-trailing arm-o'ring-keeper-nylock nut

insert pin bolts

snug to fit