Allen Cox came up on April 11 and spent a good portion of the day with the Shop class designing and building a front suspension with minimal bump steer similar to larger rails.
bulletthe concept is that the arms are parallel in the X and y orientations
bulletusing rod ends and inserts from ROD END SUPPLY
bulletHigh misalignment inserts allow the rear component of the front arms to move is a circle compared with the front arms that move up and down.
bulletBanshee stock spindles and tie rods set the length of the arms
bulletThe upper arms are set back about 1 inch or 10 degrees to allow the wheels to lean into the corners
bulletFor More of Allen's designs see the JAXWORKS videos on YOUTUBE click HERE

 
 

 

 Mr. Cunningham's
  E-Mail 		  Back to
  HonkerNet Home		  Maintained by
TBA
 Back to 
  Departmental Page		  Back to
  AHS Home		  Last Updated
  11/03/10