|
Ricky D- Buggyfreaks
BF thread here
1/2 inch Aluminum and Harbour Freight Pneumatic tires
Buggyfreak-Touchuptim's version using a HF jack
see his thread
HERE- YES, they are available for purchase
1/2" Heim to adjust nose of jack up and down to
Keep the jack as level as possible under load
 |
Contributors to this project
 | RickyD, Touchuptim, and Chance for inspiration |
| Ross Machine |
| Rod End Supply |
| Arlington HS |
OUR jack... performance warehouse
welding up the frame (longer than jack)
Andrew mocking up the jack for the WEBCAM and the OSHA inspector. We
will see what HE thinks of it.
A bolt coupler (1/2") serves as a good
threaded insert if you don't have one.
Mock-up check for level
gussets and support.
|
CHANCE-glamisdunes
GD thread here
Harbour Freight 3 ton lift with solid tires
OUR VERSION-Andrew's adaptation
5/8 bolt turned in lathe to slip into 1" tube
Increases stability of the "axle"
collar to hold at specific depth to weld
different lots of HF wheels are different size.
level side to side, wheels square with ground
moderate lift... increased width and
length for stability
rear posts/gussets/brackets still to come
|
