PARTS LIST

Up BUILD TEAM LIVE BUILD CAM CHASSIS MOCK UP FEB 7 FEB 21 WALKAROUND ROLLING CHASSIS APRIL 11 LATE MAY JUNE REASSEMBLY REASSEMBLY II FINAL Assembly ACTION HORSFALL 08 JULY 30 CONTROLS FLOOR WHEELS-TIRES TRANS CONVERSION DRIVETRAIN FOA Shocks ELECTRICAL ENGINE 1 ENGINE 2 COOLING FUEL CELL EXHAUST ENGINE PULL FRONT END REAR HUB REAR SUSPENSION SEATS ACCESSORIES COLORS PARTS LIST Columbia HS Visit BUILD TEMPLATE

CHASSIS
  • ASAP Fabrication
    2-seater Beam
    1.5" .120 / 1" .095 tube
  • TUBE CONNECTOR, 1.50" X 0.120", WELD IN (for removable rear cage)
  • 3 Step Powder Coating by Portland Powder Coating
INTERIOR
  • PRP suspension seats
    (high Back Buckets)
  • Dual slide mounts
  • Billet adjustable grab handle
  • Hecker Machine Gauge console

FUEL

  • GAS TANK, ALUMINUM,W/SUMP AND RETURN,10" X 33"-11 GAL, END FILL   
  • VALVE, FUEL SHUT OF
  • HOLLEY 15PSI TBI
    electric fuel pump
  • Canister Fuel Filter
  • AN -6 fittings with Russell Twist-lock blue line    
DRIVETRAIN
  • Close ratio 6 rib 091
    bus trans rebuilt by
    Marks Sandtrans & Weddle
  • Hecker Machine GM to VW adapter
  • Stage 2 Kennedy Clutch Pressure plate/TOB
  • 8 inch 6 puck disk
  • Sway Away 930 Axle, 19.25" long, 28 tooth
  • Sway Away IRS Axle Spacers
  • Sway Away 930CV Bolts, 3/8 - 24 thread
  • 091 to 930 drive flange
  •  EMPI Stub Axle T1 to 930CV
  • EMPI Smooth Bushings 1 7/8" ID, PR
  • GKN Automotive Porsche 930 CV Joint Bearing
  • SKF Bearing Outer
  • SKF Bearing Inner
  • - Misc. bolts, (2) gasket sets, (2) Axle Castle Nuts, (2) C-Clips, (2) O-Rings, (2) Axle Bolts, (4) CV Boots, Etc.
     

SAFETY

  • SIMPSON 2x2 Y-harnesses
    with sewn in pads
  • T-handle adjustable billet Grab bar

 

 
ENGINE
  • 1989 GMC 4.3L TBI
  • Painless Performance 4.3L TBI wiring harness
  • Red top OPTIMA Battery
  • HIGH TORQUE STARTER,76-79 091 BUS
  • MR Gasket BLUE flex radiator hoses
  • Reservoir shock clamps for radiator hoses
  • 16" electric fan (thermostat controlled)
  • BeCool Aluminum Radiator
  • Edelbrock ELITE valve covers and breathers
  • Spectre Air plenum and cone Filter
  • Gibson Fabricator kit headers with UNLEASHED mufflers
  • ARP exhaust fasteners
  • Airaid TBI Spacer

Brakes

  • CNC Inc. 648L Aluminum Disc Brakes 5 lug off road disc brake kit, long spline
  • AN(Army Navy) #3 ss braided Lines
    & 1/8" NPT to #3 AN adapters

REAR SUSPENSION

  • Eagle Performance 3x3 tube trailing arms
  • EAGLE Spring plate conversion kit
  • Type I bolt in Bearing Carriers
  • 12" BEARD 2x suspension Straps
FRONT END
  • AXLE BEAM, CHROMOLY, 6 INCH WIDER W/O TOWERS
  • POLYURETHANE BUSHING KIT
  • THRU RODS, 5" OR 6" WIDER AXLE BEAMS
  • COMBO LINK SPINDLE, HEAVY DUTY FOR INT. TIE ROD ENDS 
  • FRONT TRAILING ARMS
    4" X 1 3/4" LONGER FOR THRU RODS      
  • HD LINK PIN FOR EXTENDED FRONT TRAILING ARMS
  • WIDE 5 WHEEL HUBS (washers, studs, and nuts)
  • BRONZE BUSHING LINK PIN, FITS above
  • TIE ROD SET 6" WIDER BEAM, INT. ENDS
  • MOUNT, URETHANE, 2 1/2" SHOCK RESERVOIR TO 1 1/2" TUBING 
  • 22" BEARD 2x suspension straps

 

CONTROLS
  • Grant 440 Steering Wheel
  • OFF-ROAD Rack & Pinion
  • Billet steering carrier 7/8" shaft with needle bearings
  • U-JOINT FOR RACK AND PINION, 5/8" -36 SPLINE
  • CNC hydraulic pedal assembly with throttle
  • CNC 2# residual valve
  • CNC dual handle cutting brakes 
  • T-handle Shifter
  • Adjustable Urethane shift coupler
  • Slide plate for Pedal Assembly
  • MOUNT FOR PEDAL ASSEMBLY

LIGHTS

  • SIGNAL SWITCH,UNIVERSAL BUGGY STYLE
  • SWITCH, BRAKE LIGHT, 2 PRONG
  • BRAKE LINE T ADAPTER, FOR SENDER, RADIUSED FOR 1 1/2" TUBE MOUNT 
  • TAILLIGHT,MINI LED,RED(STOP)/AMBER(TURN)2 1/2 X 13/4 X 2
  • MARKER ,MINI,AMBER 2 1/2 X 1 3/4 X 2
  • (4)6 Inch Chrome offroad lights
  • (2)5 inch Chrome offroad lights

WHEELS and TIRES

  • Douglas 15x12 wide 5 rear wheels
  • Dick Cepek 16.5 paddles
  • Douglas 15 x 4.5
    2" backspace wide 5 front wheels
  • 165/r15 Nankang front tires
  • 15x7 Robby Gordon
    Beadlocker rims
  • Superswamper
     
  • 35x10.5 15 Boggers

ACCESSORIES

  • Canvas top (velcro attached)
  • Bolt-on fold down whip holder
  • BUGGYFREAKS flag
  • Trunk Wing from Tech 3
  • 16ga Al side panels
  • Clamp on rearview mirror
  • Vinyl graphics from
    CHAOS Graphics

Back to the SHOP pages

www.honkernet.net/ahs

last modified 07/21/2010

BY MRC