H-ARM UPGRADE

Up SHAKEDOWN FRONT SUSP H-ARM UPGRADE H-ARM UPGRADE 2 UPGRADE shakedown CHASSIS MOD SAFETY UPGRADE STEERING REAR SHOCK 12-13 UPDATE

Allen Cox came up on April 11 and spent a good portion of the day with the Shop class designing and building a front suspension with minimal bump steer similar to larger rails.
the concept is that the arms are parallel in the X and y orientations
using rod ends and inserts from ROD END SUPPLY
High misalignment inserts allow the rear component of the front arms to move is a circle compared with the front arms that move up and down.
Banshee stock spindles and tie rods set the length of the arms
The upper arms are set back about 1 inch or 10 degrees to allow the wheels to lean into the corners
For More of Allen's designs see the JAXWORKS videos on YOUTUBE click HERE

 

 

 

 Mr. Cunningham's
  E-Mail 
 Back to
  HonkerNet Home
 Maintained by
TBA
 Back to 
  Departmental Page
 Back to
  AHS Home
 Last Updated
  07/21/10