Allen Cox came up on April 11 and spent a good portion of the day with the Shop class designing and building a front suspension with minimal bump steer similar to larger rails.

The concept is that the arms are parallel in the X and y orientations.

  • Using rod ends and inserts from ROD END SUPPLY.

  • High misalignment inserts allow the rear component of the front arms to move is a circle compared with the front arms that move up and down.

  • Banshee stock spindles and tie rods set the length of the arms.

  • The upper arms are set back about 1 inch or 10 degrees to allow the wheels to lean into the corners.

  • For More of Allen's designs see the JAXWORKS videos on YOUTUBE click HERE