SPINDLES

  • Obtain Through bolts, bushings & nuts, Combo Spindles, Shim/bushing Kit, HD Link Pins, & Trailing Arms

  • Insert bushings into spindles hole to the inside

  • Install through bolts bushings and trailing arms

  • Level trailing arms and measure vertical offset (ours was 5.5mm)

  • Shim pins according to offset chart see HERE

  • Insert pins and shims

  • Make sure spindles have same link pin angles... YES there is a backwards way to do it and the bolts wont line up straight-rotate 180 degrees, re-insert

  • assemble: Pin head-shims-spindle-shims-trailing arm-o'ring-keeper-nylock nut

  • insert pin bolts

  • snug to fit